排ガス規制の監視強化が新たな触媒技術の採用を促すとSDCmaterials
排ガス規制の監視強化が新たな触媒技術の採用を促すとSDCmaterials
AsiaNet 62338(1407)
【テンピ(米アリゾナ州)2015年10月28日PR Newswire=共同通信JBN】
*高性能触媒物質メーカーは排ガス制御システムの進展に転機到来を見る
*SDCのNano-on-Nano(TM)触媒物質は高価な白金族金属の消費を半減する
*新技術が排ガス制御とコスト・燃料効率・性能を両立させる触媒とエンジン設計者の選択肢を広げる
Logo - http://photos.prnewswire.com/prnh/20140922/147665
米国の自動車用高性能触媒物質メーカーSDCmaterialsは28日、排ガス規制の取り締まり監視が強化されることで、いや応なく触媒技術が進歩することになると指摘した。SDCのウィリアム・スタロン取締役会長は、同問題に関する状況について以下の声明を発表し、排ガス制御の前面に登場するイノベーションの背景を説明した。
「現在大々的に報じられているのは明白な規制違反をめぐるものである。これは排ガス制御システムの能力に関する問題ではない。しかしながら、今回注目を浴びたことによって当然ながら、より厳格な環境保護のための法規制の採用が加速され、これが新しい技術の登場を後押しする」
「SDCでは、排ガス削減に使用される重要で最も高価な効力のある成分の有効性を大幅に高める飛躍的な発見を成し遂げた。具体的には、SDCが特許を保有するNano-on-Nano(TM)フォーミュレーションを排気後処理触媒に使用すれば、白金族金属は従来の触媒に比べて半分しか必要としない。当社独自の触媒粉末は、社内、OEM、独立系組織による厳格な試験を経ており、これまでの試験結果では2016年前半での商用化の見通しが強まった」
「従来の自動車触媒は驚異的な科学技術であり、40年以上もの時間の試練に耐えてきた。多数の進歩が加えられたものの、触媒層を形成する際に基本的な「湿式」の化学合成品を使用することには事実上変わりなかった。今こそ触媒の構成に新しい化学合成品を採用する時期である。これによって、自動車業界がこれまでにはなかった規制の高まり、複雑さを増すエンジン設計、際限ないコスト削減の圧力によって生じるおびただしい課題に対処することを支援できる」
背景の追加
SDCが特許を保有する物質は触媒およびエンジン設計にとって新しい多くの選択肢を広げる。同じ触媒性能を半分のコストで実現し、または、触媒性能を同じコストで向上させることができる。このイノベーションは、自動車メーカーが排ガス制御、燃料効率、性能、コストのバランスを保つうえで極めて重要である。これらは概して、エンジン設計の際に相反する要因となる。
自動車メーカーは二酸化炭素削減、燃料節約で厳格さを増す世界的な基準に適合する努力を重ねており、この最新の注意を要するバランスを保つことは今後10年間にわたり、さらに困難なものになる。米国の乗用車および軽トラックのメーカーは2025年までに、販売台数加算の平均燃費がガロン当たり54.5マイルを達成することが求められている。この種の性能を達成するには、エンジン性能と排気後処理のイノベーションに新しい波を持ち込む必要がある。
▽SDCmaterials, Inc.について
SDCmaterialsはこれまでにない素材製作と統合プラットフォームに基づく高度な触媒製品を開発、販売する。2004年に創設された同社はアリゾナ州テンピに本社と開発センターを構えている。また同社はドイツのシュワルツハイデに生産施設も所有し、運営している。
SDCへの投資家には、ゼネラルモーターズ、ボルボ・グループ、中国最大の自動車メーカーSAIC Motor Corp.のベンチャーキャピタル部門に加え、クリーンテック・ベンチャーキャピタルのリーダーであるEmerald Technology Partners、Invus Financial Advisorsが含まれている。詳細はhttp://www.sdcmaterials.com を参照。
▽報道関係問い合わせ先
Sean Healy
Healy Corporate Communications
+1-201-857-2520 or +1-201-218-2039/cell
sean@healycorp.com
ソース:SDCmaterials, Inc.
SDCmaterials says Heightened Scrutiny on Emissions Compliance will Drive Adoption of Emerging Catalyst Technology
PR62338
TEMPE, Ariz., Oct. 28, 2015 /PRNewswire=KYODO JBN/ --
- Manufacturer of high-performance catalyst materials sees tipping point in
advancement of emission-control systems
- SDC's Nano-on-Nano(TM) catalytic materials cut consumption of costly
platinum-group metals in half
- Emerging technologies offer more options for catalyst and engine designers in
balancing emissions control with cost, fuel efficiency, and performance
Logo - http://photos.prnewswire.com/prnh/20140922/147665
SDCmaterials, a U.S. manufacturer of high-performance automotive catalytic
materials, today said the heightened regulatory scrutiny on emissions
compliance will inevitably drive advances in catalyst technology. SDC Executive
Chairman William Staron issued the following statement as context on the issue
and to provide background on innovations coming to the fore in emissions
control:
"Today's headlines are being driven by overt non-compliance. This is not an
issue of emissions-control system capabilities; the attention, however, will
inevitably accelerate the adoption of stricter environmental enforcement, which
will drive emerging technologies.
"At SDC, we have created a breakthrough that substantially improves the
efficacy of the primary, and most expensive, active ingredient used in
emissions abatement. Specifically, SDC's patented Nano-on-Nano(TM)
formulation, which, when used in exhaust after-treatment catalysts, requires
just half the amount of platinum group metals compared to traditional
catalysts. Our proprietary catalytic powders have been subjected to rigorous
internal, OEM, and independent testing; and results to date have reinforced
expectations for early 2016 commercialization.
"The conventional automotive catalyst is a technological marvel, having
withstood the test of time for more than four decades. Despite its many
advances, the use of basic 'wet' chemical composition in making the catalytic
layer has remained virtually unchanged. The time is right for a new chemical
composition in catalyst design - to help the auto industry meet the myriad
challenges presented by an unprecedented confluence of rising regulation,
growing complexity in engine design, and never-ending pressures to cut costs."
Additional Background
SDC's patented materials open an array of new options for catalyst and engine
designers - whether it's to deliver the same catalytic performance at half the
cost or to improve the catalytic performance at the same cost. Such innovations
will be essential in helping automakers balance emissions control, fuel
efficiency, performance, and cost - which typically are competing objectives in
engine design.
This delicate balance will become even more challenging over the next decade as
manufacturers strive to comply with increasingly stringent standards globally
in carbon reduction and fuel economy. U.S. manufacturers of passenger cars and
light trucks will be required to achieve 54.5 miles per gallon in
sales-weighted average fuel economy by 2025. To achieve this type of
performance, a new wave of engine performance and exhaust after-treatment
innovation will be required.
About SDCmaterials, Inc.
SDCmaterials develops and commercializes advanced catalyst products based on
their novel materials fabrication and integration platform. Founded in 2004,
the company's headquarters and R&D center are in Tempe, Arizona. It also owns
and operates a production facility in Schwarzheide, Germany.
SDC's investors include the venture capital arms of General Motors, Volvo
Group, and SAIC Motor Corp., China's largest automaker, as well as Emerald
Technology Partners, a leader in cleantech venture capital; and Invus Financial
Advisors. For more information, visit http://www.sdcmaterials.com.
Media contact:
Sean Healy
Healy Corporate Communications
+1-201-857-2520 or +1-201-218-2039/cell
sean@healycorp.com
SOURCE: SDCmaterials, Inc.
本プレスリリースは発表元が入力した原稿をそのまま掲載しております。また、プレスリリースへのお問い合わせは発表元に直接お願いいたします。
このプレスリリースには、報道機関向けの情報があります。
プレス会員登録を行うと、広報担当者の連絡先や、イベント・記者会見の情報など、報道機関だけに公開する情報が閲覧できるようになります。