ROHM’s New "TRCDRIVE pack (TM)" with 2-in-1 SiC Molded Module:

Significantly Reduces xEV Inverter Size

ROHM

KYOTO, Japan, June 11, 2024 /Kyodo JBN/ --

- Industry-leading* Power Density Achieved by Integrating 4th Generation SiC MOSFETs in Compact Package -

 

ROHM Co., Ltd. has developed four models as part of the TRCDRIVE pack (TM) series with 2-in-1 SiC molded modules (two of 750V-rated: BSTxxxD08P4A1x4, two of 1,200V-rated: BSTxxxD12P4A1x1) optimized for xEV (electric vehicles) traction inverters. TRCDRIVE pack (TM) supports up to 300kW and features high-power-density and a unique terminal configuration, helping solve the key challenges of traction inverters in terms of miniaturization, higher efficiency, and fewer person-hours.

 

As the electrification of cars rapidly advances towards achieving a decarbonized society, the development of electric powertrain systems that are more efficient, compact, and lightweight is currently progressing. However, for SiC power devices that are attracting attention as key components, achieving low loss in a small size has been a difficult challenge. ROHM solves these issues inside powertrains with its TRCDRIVE pack (TM).

 

A trademark brand for ROHM SiC molded type modules developed specifically for traction inverter drive applications, TRCDRIVE pack (TM) reduces size by utilizing a unique structure that maximizes heat dissipation area. On top, ROHM’s 4th Generation SiC MOSFETs with low ON resistance are built in, resulting in an industry-leading power density level 1.5 times higher than that of general SiC molded modules while greatly contributing to the miniaturization of inverters for xEVs.

 

The modules are also equipped with control signal terminals using press fit pins enabling easy connection by simply pushing the gate driver board from the top, reducing installation time considerably. In addition, low inductance (5.7nH) is achieved by maximizing the current path and utilizing a two-layer bus-bar structure for the main wiring, contributing to lower losses during switching.

 

TRCDRIVE pack (TM) image: https://cdn.kyodonewsprwire.jp/prwfile/release/M106254/202406041753/_prw_PI1fl_w5DAh6xu.jpg

 

Despite developing modules, ROHM has established a mass production system similar to discrete products, making it possible to increase production capacity 30 times compared to conventional SiC case-type modules.

 

Release: https://www.rohm.com/news-detail?news-title=2024-06-11_news_trcdrive-pack&defaultGroupId=false

 

Product image: https://cdn.kyodonewsprwire.jp/prwfile/release/M106254/202406041753/_prw_PI2fl_MuIp6XyE.jpg

 

*ROHM’s June 11, 2024 study

TRCDRIVE pack (TM) is the trademark or registered trademarks of ROHM Co., Ltd.

 

About ROHM: https://kyodonewsprwire.jp/attach/202406041753-O1-8a0140NZ.pdf

 

Logo: https://cdn.kyodonewsprwire.jp/prwfile/release/M106254/202406041753/_prw_PI3fl_54i0YolV.jpg

 

Official website: https://www.rohm.com/

 

本プレスリリースは発表元が入力した原稿をそのまま掲載しております。また、プレスリリースへのお問い合わせは発表元に直接お願いいたします。

プレスリリース添付ファイル

プレスリリース添付画像

Image_SiC Molded Modules TRCDRIVE pack

| Small | Normal |
| Big | Original |

Product-Image_SiC Molded Modules TRCDRIVE pack

| Small | Normal |
| Big | Original |

ROHM_brandmark

| Small | Normal |
| Big | Original |

このプレスリリースには、報道機関向けの情報があります。

プレス会員登録を行うと、広報担当者の連絡先や、イベント・記者会見の情報など、報道機関だけに公開する情報が閲覧できるようになります。

プレスリリース受信に関するご案内

このプレスリリースを配信した企業・団体

  • ※購読している企業の確認や削除はWebプッシュ通知設定画面で行なってください
  • SNSでも最新のプレスリリース情報をいち早く配信中